Curved pipe tile liner is a excellent wear-resistant material mainly pasted on the inner wall of pipeline or cyclone.It can reduce the wear and tear of the equipment and prolong its service life. According to different pipe curvature and length, we can customize different products for customers.Application:Curved pipe tile liner is mainly pasted on the inner wall of pipes, elbows and hydrocyclones in chemical, cement, mining industry etc.Properties:high hardnessimpact resistancecorrosion resistance
QMX’s engineered ceramic solutions provide a complete range of ceramic wear resistant tiles (9.0 on the Mohs scale) that extend the wear life of your mineral processing equipment in the mining, mineral extraction and power generation industries.These ceramic tiles provide a hard wearing solution in the mining industry, with vibrating feeders, transfer chutes, cyclones, pipes and other traditional "high-wear areas". Engineered tiles are pressed with chamfered sides and then cut precisely while still in their green state, to the required shape. This ensures that gaps between the tiles are minimised and wear of the tiles is reduced as chipping is eliminated.Our Features & Benefits l Polishes to a smooth glassy surface – zero friction against minerals.l Provide the highest protection against abrasion and corrosion.l Easily installed, maintained and replaced. l Suitable for wet and dry processing applications.l Wear protection up to 400°C.Technical Data:CategoryHC90HC92HC95HCT95HC99HC-ZTAZrO2Al2O3≥90%≥92%≥95%≥ 95%≥ 99%≥75%/ZrO2/////≥21%≥95%Density>3.50g/ cm3>3.60g/cm3>3.65g/cm3>3.70g/cm3>3.83g/cm3>4.10g/cm3>5.90g/cm3HV 20≥900≥950≥1000≥1100≥1200≥1350≥1100Rock Hardness HRA≥80≥82≥85≥88≥90≥90≥88Bending Strength MPa≥180≥220≥250≥300≥330≥400≥800Compression strength MPa≥970≥1050≥1300≥1600≥1800≥2000/Fracture Toughness KIc MPam 1/2≥3.5≥3.7≥3.8≥4.0≥4.2≥4.5≥7.0Wear Volume≤0.28 cm3≤0.25cm3≤0.20cm3≤0.15cm3≤0.10 cm3≤0.05cm3≤0.02cm3
Alumina ceramic tiles for coal and other material handling and processing industries. Ceramic linings provide long-lasting solutions to the problems caused by abrasive wear and corrosion in a variety of hostile environments. Alumina ceramic linings will outlast lower grade materials commonly used to line or protect processing and material handling equipment, including Basalt, stainless steel, carbon steel and wear resistant plates, by factors of 3 to 15 times.QMX’s wear resistant ceramic tiles can be cut into any shape and are easy to install and maintain. They are suitable for both wet and dry processing applications. Advanced ceramics combine high strength and toughness with extreme hardness to deliver exceptional wear resistance.The ceramic pipe tiles,also cale taper tile or Trapezoidal tile, are used on a range of equipment including pipes, tanks, chutes, pumps, flotation cells, thickeners, launders and feed spouts or chutes.CategoryHC90HC92HC95HCT95HC99HC-ZTAZrO2Al2O3≥90%≥92%≥95%≥ 95%≥ 99%≥75%/ZrO2/////≥21%≥95%Density>3.50g/ cm3>3.60g/cm3>3.65g/cm3>3.70g/cm3>3.83g/cm3>4.10g/cm3>5.90g/cm3HV 20≥900≥950≥1000≥1100≥1200≥1350≥1100Rock Hardness HRA≥80≥82≥85≥88≥90≥90≥88Bending Strength MPa≥180≥220≥250≥300≥330≥400≥800Compression strength MPa≥970≥1050≥1300≥1600≥1800≥2000/Fracture Toughness KIc MPam 1/2≥3.5≥3.7≥3.8≥4.0≥4.2≥4.5≥7.0Wear Volume≤0.28 cm3≤0.25cm3≤0.20cm3≤0.15cm3≤0.10 cm3≤0.05cm3≤0.02cm3