ceramic lined cyclone
Language
info@chinaqimingxing.com +86-533-3591856
products

Impact ceramic cube

1580046710628889.jpg


1. Detailed description:


alumina cubes


The Ceramic Cube is a high-performance abrasion and impact resisting linings for high-impact, high-pressure applications in which ceramic tile may not have sufficient structural resistance, and high-performance rubber may not offer the required wear life. In extreme applications, the Cube liners can be installed in a matrix or abrasion resistant steel plate to provide structural support for the ceramic/rubber matrix and provide exceptional wear life where competing products cannot.



Used in heavy industry for years as a cost-effective, wear-resistant solution, these lightweight materials offer high durability, strength, and excellent abrasion and corrosion resistance. Alumina wear resistant compositions include:


l Alumina 92: most common wear product with great wear resistance


l Alumina 95: increased wear performance


l Alumina 96: premium alumina for best wear resistance


l Zirconium toughened alumina(ZTA):  increased strength and impact resistance



2.Product features:


> High hardness 

> Superior abrasion and impact resistance 

> Corrosion and chemical resistance 

> Light weight 

> Easy installation by epoxy resin or bolt 

> Improve your working environment-noise, vibration and safety


3. Product Specification:


- Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc.

- Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.

- Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm

- Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples)

- Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc.

- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.


4. Ceramic wear lining tiles for a variety of applications:


Processing equipment:


l Pharmaceutical clean rooms


l Food processing plants


l Grain handling


l Mineral processing


l Cement manufacturing


l Chemical processing


l Large Cyclones:


l Coal-fired power plants


l Steel Mills


l Asphalt Plants


l Petrochemical plants


l Pulp and paper mills


CategoryHC90HC92HC95HCT95HC99HC-ZTAZrO2
Al2O3≥90%≥92%≥95%≥ 95%≥ 99%≥75%/
ZrO2/////≥21%≥95%
Density>3.50g/ cm3>3.60g/cm3>3.65g/cm3>3.70g/cm3>3.83g/cm3>4.10g/cm3>5.90g/cm3
HV 20≥900≥950≥1000≥1100≥1200≥1350≥1100
Rock Hardness HRA≥80≥82≥85≥88≥90≥90≥88
Bending Strength MPa≥180≥220≥250≥300≥330≥400≥800
Compression strength MPa≥970≥1050≥1300≥1600≥1800≥2000/
Fracture Toughness KIc MPam 1/2≥3.5≥3.7≥3.8≥4.0≥4.2≥4.5≥7.0
Wear Volume≤0.28 cm3≤0.25cm3≤0.20cm3≤0.15cm3≤0.10 cm3≤0.05cm3≤0.02cm3
Tell us your needs