1. Detailed description:
In aggressive industrial applications, equipment where high impact , high abrasion inevitably suffer mechanical attack, chemical attack, corrosion, or by a combination of these three modes.
QMX’s Ceramics can offer various of ceramic liner plate for customer's abrading environment. Composite ceramic wear liner is intended for the toughest applications with very high materials. when a combination of extreme wear and impact resistance ans long wear life is needed , Ultraming offer composite ceramic wear liner with large and hard ceramic bricks vulcanized into a matrix of wear resistant rubber .due to its elastic properties the rubber acts as a dampener. It makes it possible to use this product in applications with a lot of impact without the risk of crushing the ceramic bricks .
> High hardness
> Superior abrasion and impact resistance
> Corrosion and chemical resistance
> Light weight
> Easy installation by epoxy resin or bolt
> Improve your working environment-noise, vibration and safety
3. The alumina ceramic tiles for vulcanization including:
- Square tile: 10x10x2~10mm, 17.5x17.5x2~15mm, 20x20x2~15mm, 33x33x7~25mm, etc.
- Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc.
- Hexagonal tile: S12xT3~20mm, S19xT6-25mm
- Ceramic Block: 40x40x40mm, 32x32x22mm, 38x38x38mm,etc.
- Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm , 40x40mm,50x50mm etc.
4. Applicatiion of equipments
|1||Ceramic Tiles||Material||92%, 95%, T95%,96%, ZTA|
|2||Rubber||Component||natural rubber, nitrile-butadiene rubber ,Flame Retardant ,others|
|Tensile strength at break||≥15Mpa|
|Elongation at break||≥250%|
|Adhesive between tile and rubber||1.2-3.0 Mpa|
|Adhesive between rubber and equipment||≥3.5 Mpa|
|Thermal conductivity.(normal temperature)||2w/m·k|
|Aging period||≥15 Years|
|Working temperature||-50ºC - 200ºC|
|4||Adhesive||Appearance||Brown glutinous liquid|
|Peel strength||48h N/2.5cm≥120|
|Compressive strength||≥850 Mpa|
|Working temperature||-20ºC - 100ºC|
|Whole Plate (mm)||150x300, 300x300, 450x000, 500x500, 600x450 etc.|
|Ceramic Size (mm)||Square Tile: 10x10, 20x20, 33x33, 50x50, 100x100, 150x100,etc.|
|Hexagonal Tile: 12x3, 12x6, 19x7, 19x12.5, 19x25,etc.|
|Locking block with lock and groove: 38x38, 40x40, 30x30,etc.|
|Dimple Tile: 20x20 with 5 dimples, 20x30 with 18 dimples, 20x30 with |
13 dimples, 20x20 with 1 semi-spherical surface
|Ceramic Thickness (mm)||3-75mm|
|Alloy Steel Size (mm)||Thickness: 3-10mm|
|Rubber Thickness (mm)||Depends on the impact stress expected.|